Copyright (C) 2007 Acme Web Services
All rights reserved.
No material may be reproduced in part or in whole without
written consent from holders.
Radio Control Model Aircraft
The Togo (thats pronounced "toe-go") is a new sport fun-fly model designed by Doug Lee that can be used as a fun-fly every day model, or a 3-D acrobatic model. Model is fully aerobatic with a symmetrical airfoil that has a very wide speed envelope. Design utilizes a one piece wing that has no dihedral.
All main parts for model are laser cut from balsa and plywood. Tail feathers are laser cut, ailerons and elevators are from tapered stock. Wing ribs have building tabs on them for ease of assembly with a ledge on tab for trailing edge stock jigging. Most of the setup hardware comes with model including pushrods, threaded rods and links, main landing gear, tail wheel bracket, hinges, control horns and screws. Plans come as two sheets with construction manual and 66 B&W construction photos
The Togo kit includes landing gear and fiberglass cowl; fiberglass wheel pants are optional.
The Togo has a 56” wingspan with 686 sq. in of wing area. Length of model is 49 1/2” and comes in at a weight of 6 to 6 1/4 lbs.
A .53 to .91 cid engine can be used with model depending on the intended use.
Model requires a four channel radio with 5 servos.
The ready-to-cover version of the Togo is handcrafted from D&L Design's plans and comes with pre-assembled wing, tail and fuselage ready to cover. Fiberglass cowl, moulded canopy, landing gear, wheels, and hardware are all included.
Kits for Real Kit Builders
Plan price includes shipping. Call or EMAIL for KIT or ARC shipping costs.
This kit was reviewed by Radio Control Modeler (RCM), June 2004, vol. 41, no. 6.
For REVIEW ABSTRACT
This kit was converted for electric power by Jack Irey.
For CONVERSION DETAILS
Addtional Parts Required
Togo Plans Only:
Togo ARC Kit: